Low-Cost Digital and Analog Data Acquisition Devices
Starting at $295, these new low-cost digital and analog modules from NI offer up to 70% lower cost per channel. Below you will find technical details and resources for the new low cost I/O modules. You can also learn how to increase your DAQ system performance by 100 to 1000 times and develop your measurement or control system without programming. The new digital I/O and analog output modules extend the reach of PC-based data acquisition to mission-critical industrial applications, and they are powered by NI-DAQmx software technology for dramatic improvements in I/O performance and ease of use.
|
| NI 6509 | Digital I/O | Industrial 96-CH 5V/TTL/CMOS
digital input/output (24 mA) |
| NI 6514 | Digital I/O | Industrial 32 digital input,
32 source digital output isolated (?30 V) |
| NI 6515 | Digital I/O | Industrial 32 digital input,
32 sink digital output isolated (?30 V) |
| NI 6528 | Digital I/O | Industrial 48-CH CH/CH,
isolated digital input/output (?60 VDC) |
| NI 6722 | Analog Output | 8-channel, 13-bit, simultaneous analog output,
8 DIO, 2 CTR/Timer |
| NI 6723 | Analog Output | 32-channel, 13-bit, simultaneous analog output,
8 DIO, 2 CTR/Timer |
| NI 6013 | Multifunction I/O | 200 KS/s, 16-Bit, 16 AI
8 DIO, 2 CTR/Timer multifunction DAQ (Now NI-DAQmx enabled) |
| NI 6014 | Multifunction I/O | 200 KS/s, 16-Bit, 16AI
8 DIO, 2 CTR/Timer multifunction DAQ (Now NI-DAQmx enabled) |
Click here to view these resources
- White Paper: Highest Reliability Digital I/O at the Lowest Cost - Learn how all of the industrial digital I/O modules take advantage of NI-DAQmx technology to speed application development with many helpful features including the NI DAQ Assistant, automatic code generation, and high performance multithreaded streaming technology.
- White Paper: Using the NI Digital I/O High Reliablity Feature Set for Industrial Applications - This white paper describes the operation of the new industrial features, their applications in typical industrial scenarios and how to program these features in LabVIEW.
- Application Note: Choosing the Right Industrial Digital I/O Module for Your Digital Output Sensor - Learn how to pick the right digital I/O module for your digital output sensor. In this application note, we first classify digital output sensors based on their output signal and circuit interface and then point out what critical parameters need to be taken into account when selecting a digital I/O module.
- NI-DAQ Assistant Tutorial - Take a step by step tutorial on developing your DAQ system with without programming.
View Datasheets, Pricing, and Purchase a Low Cost Data Acquisition Product
Digital Input/Output Devices
Analog Output Devices
Multifunction Input/Output Devices
Digital Input/Output (DIO)
- High reliability industrial feature set: programmable power-up states, digital I/O watchdogs, change detection, isolation, and programmable input filters
- Low cost solution with superior features for manufacturing test and industrial control applications
- NI-DAQmx software technology for highest productivity and performance (NI-DAQmx 7.1 and higher)
Analog Output (AO)
- 8 or 32-channel analog output boards; 13-bit resolution, simultaneous update
- 800 kS/s, 182 kS/s, and 45 kS/s per channel for 1, 8, and 32 channels simultaneously
- NI-DAQmx software technology with configuration utility to simplify configuration and measurements
Multifunction Input/Output (MIO)
- Basic DAQ boards for PCI -- 200 kS/s, 16-bit, 16 analog inputs
- Up to two 16-bit analog outputs, 8 digital I/O lines, two 24-bit counters, digital triggering
- NI-DAQmx software technology with configuration utility to simplify configuration and measurements
The NI-DAQmx Software Difference
The innovative NI-DAQ 7.1 driver software with NI-DAQmx technology allows engineers and scientists to access the full functionality of the new digital I/O and analog output modules, as well as the popular PCI-6013 and PCI-6014 modules. NI-DAQ 7.1 includes NI DAQmx technology to speed development with many features designed to make configuration and programming easy.
- Allow the NI DAQ Assistant to guide you to fast, accurate measurements with no programming
- Use Automatic Code Generation to create your application in NI LabVIEW, C, Visual Basic .NET, or C#
- Take advantage of multithreaded streaming technology for 1000X performance improvements
- Leverage automatic timing, triggering, and synchronization technology to make advanced applications easy
|
